Free shipping on orders over $150
HomeCare & maintenanceCare Products For Lacquered Floors

Bona Wood Floor Refresher 1 Litre for Lacquered Floors

$42.00

In stock

A ready-to-use treatment for varnished and lacquered timber floors that are scratched or dull. Bona describes it as reviving the surface to a fresh, high-gloss finish with a protective layer against everyday wear. Polyurethane-based, covers about 50m² per litre.

1 litre~50 m² / litreHigh glossReady to useLacquered & varnished

For lacquered and varnished floors, and a high-gloss finish. Not for oiled or waxed floors. Test a small, hidden area first.

Buy it together and save

Buy it with the Bona applicator pad and save $5

Get the refresher and the Bona pad that lays it down thin and even, together as one kit.

$62Save $5
See the bundle

Bring a varnished floor back to a fresh shine

Bona Wood Floor Refresher is a treatment for varnished and lacquered timber floors that are looking scratched or dull. Bona describes it as reviving the surface and leaving a fresh, high-gloss finish, with a protective layer against everyday wear. It is polyurethane-based, without waxes, and is made for finished (sealed) timber.

Volume
1 litre
Sheen
High gloss
For
Lacquered & varnished floors
Coverage
~50 m² per litre (Bona)
Dilution
None, ready to use
Dry time
Touch dry 30 to 60 min, recoat after 2 hrs (Bona)

Product and performance detail as stated by Bona. Coverage and timings are Bona's.

A fresh, protective coat over the lacquer

Micro-scratches and wear in the lacquer scatter the light and read as a tired floor. The refresher lays a fresh coat over the top, so the daily traffic lands on that instead of on your floor's own finish.

Bona Refresher
The lacquer
The timber

Bona Refresher the fresh, high-gloss coat that revives the surface. The lacquer your floor's own varnished or sealed finish. The timber the boards underneath.

Illustrative. Surface-refresh description: Bona.

For lacquered floors, and a high-gloss finish

It leaves a high-gloss finish, so it is not the product for a matt look, and it is not for oiled or waxed floors. If you are not sure what finish you have, or want to check the sheen, test an out-of-the-way patch and let it dry before doing the whole floor.

How to apply it, and what to avoid

  1. Clean the floor first. Clean the whole floor with a wood floor cleaner and let it dry, so no dirt is trapped under the coat.
  2. Shake the bottle well.
  3. Apply a thin, even coat with a Bona Applicator Pad, working with the grain.
  4. Let it touch dry for 30 to 60 minutes.
  5. A second coat can be applied after 2 hours, if needed.

Application follows Bona's guidance. Clean the floor first (Bona Wood Floor Cleaner or FirstFloor Concentrate). Timings are Bona's.

Do
  • Strip old build-up with a hard-floor cleaner before you recoat.
  • Keep furniture and rugs off until it has cured.
Don't
  • Lay it on thick. Thin, even coats only.
  • Walk on it before it is dry, or recoat sooner than two hours.

Clean it, refresh it, apply it evenly

Bona Wood Floor Refresher 1 Litre for Lacquered Floors

Bona Wood Floor Refresher 1 Litre for Lacquered Floors

Revives a lacquered floor to a fresh, high-gloss finish.

Reviews

Used this product?

We are collecting reviews on this product. Yours will be published once a few people have had their say, so the first review is never the only one.

Your email address will not be published. Required fields are marked *

for-all-floors-icon

Unsure which products will best meet your needs?

Bona Wood Floor Refresher$42.00
Add to cart
Four containers of 1F Wood Floor Cleaning Concentrate for maintaining lacquered and oiled timber flooring.

Order your floor care products online and receive free shipping on orders over $150

Shopping Cart
Questions about your floor? 0800 843 662·info@firstfloorcleaning.co.nz·Newmarket, Auckland