HomeCare & maintenanceCare Products For Lacquered Floors
Bona Wood Floor Refresher 1 Litre for Lacquered Floors
$42.00
Availability: In stock
A ready-to-use treatment for varnished and lacquered timber floors that are scratched or dull. Bona describes it as reviving the surface to a fresh, high-gloss finish with a protective layer against everyday wear. Polyurethane-based, covers about 50m² per litre.
1 litre~50 m² / litreHigh glossReady to useLacquered & varnished
For lacquered and varnished floors, and a high-gloss finish. Not for oiled or waxed floors. Test a small, hidden area first.
Buy it together and save
Buy it with the Bona applicator pad and save $5
Get the refresher and the Bona pad that lays it down thin and even, together as one kit.
$62Save $5
Bring a varnished floor back to a fresh shine
Bona Wood Floor Refresher is a treatment for varnished and lacquered timber floors that are looking scratched or dull. Bona describes it as reviving the surface and leaving a fresh, high-gloss finish, with a protective layer against everyday wear. It is polyurethane-based, without waxes, and is made for finished (sealed) timber.
Volume
1 litre
Sheen
High gloss
For
Lacquered & varnished floors
Coverage
~50 m² per litre (Bona)
Dilution
None, ready to use
Dry time
Touch dry 30 to 60 min, recoat after 2 hrs (Bona)
Product and performance detail as stated by Bona. Coverage and timings are Bona's.
A fresh, protective coat over the lacquer
Micro-scratches and wear in the lacquer scatter the light and read as a tired floor. The refresher lays a fresh coat over the top, so the daily traffic lands on that instead of on your floor's own finish.
Bona Refresher
The lacquer
The timber
Bona Refresher the fresh, high-gloss coat that revives the surface. The lacquer your floor's own varnished or sealed finish. The timber the boards underneath.
Illustrative. Surface-refresh description: Bona.
For lacquered floors, and a high-gloss finish
It leaves a high-gloss finish, so it is not the product for a matt look, and it is not for oiled or waxed floors. If you are not sure what finish you have, or want to check the sheen, test an out-of-the-way patch and let it dry before doing the whole floor.
How to apply it, and what to avoid
- Clean the floor first. Clean the whole floor with a wood floor cleaner and let it dry, so no dirt is trapped under the coat.
- Shake the bottle well.
- Apply a thin, even coat with a Bona Applicator Pad, working with the grain.
- Let it touch dry for 30 to 60 minutes.
- A second coat can be applied after 2 hours, if needed.
Application follows Bona's guidance. Clean the floor first (Bona Wood Floor Cleaner or FirstFloor Concentrate). Timings are Bona's.
Do
- Strip old build-up with a hard-floor cleaner before you recoat.
- Keep furniture and rugs off until it has cured.
Don't
- Lay it on thick. Thin, even coats only.
- Walk on it before it is dry, or recoat sooner than two hours.
Clean it, refresh it, apply it evenly
Bona Wood Floor Refresher 1 Litre for Lacquered Floors
Revives a lacquered floor to a fresh, high-gloss finish.
Reviews
Used this product?
We are collecting reviews on this product. Yours will be published once a few people have had their say, so the first review is never the only one.
Unsure which products will best meet your needs?
Related products
Bona Wood Floor Refresher$42.00
Add to cart
