Free shipping on orders over $150
HomeCare & maintenanceCare Products For Oiled Floors

Admonter Maintenance Oil Natural for Wood Flooring

$149.00

Availability: In stock

An oil treatment for timber floors finished with hardwax or oxidative oils. Admonter describes it as replenishing lost oils and reducing visible wear, so a tired floor gets its character back. Dries to a soft matte finish. Coverage 1 litre = 70 to 100m².

1 litre~70-100 m² / litreSoft matteOiled floors only

For oiled floors only. Oil-soaked cloths can self-combust: submerge used cloths in water. Test a small, hidden area first.

Feed an oiled floor, bring back its character

Admonter Maintenance Oil Natural is an oil treatment for timber floors finished with hardwax or oxidative oils, whether the floor is looking tired or just due for routine care. Admonter describes it as replenishing lost oils, reducing visible wear and bringing back the natural character of the wood, absorbing into the timber rather than leaving a film or an unnatural shine.

Volume
1 litre
Colour
Clear
Sheen
Soft matte
For
Hardwax & oiled timber
Coverage
1 litre = 70 to 100m² (Admonter)
Apply by
Hand or buffing machine

Suitability, coverage and finish as stated by Admonter.

It feeds the wood, it does not sit on top

An oiled floor is protected by oil soaked into the timber, not by a surface coat. As that oil wears the grain goes flat and the busy areas read as tired, so the fix is to feed the wood rather than coat over the top of it.

Two things to get right

It is for oiled and hardwax-oiled floors, not for lacquered, sealed or raw timber, which are cared for differently. If you are not sure of your finish, test an out-of-the-way patch first.

Oil-soaked cloths and pads can heat up and catch fire on their own. As with any drying oil, submerge used cloths in water straight after use, and do not leave them screwed up in a bin.

How to apply it, and what to avoid

  1. Clean the floor first with a cleaner made for oiled floors, and make sure it is dry and dust-free.
  2. Apply a thin, even coat to the clean, dry timber, by hand on small areas or by machine on larger ones.
  3. Buff it in with a white pad for the best result.
  4. Let it dry with good ventilation before using the floor.
  5. Submerge used cloths in water. Oil-soaked cloths can self-combust if left dry.

General good-practice steps for a maintenance oil. Coverage and finish are Admonter's.

Do
  • Feed it on a routine, not only when the floor already looks tired.
  • For a whole floor, apply it by machine rather than by hand, as the maker's own instructions describe for larger areas.
Don't
  • Lay it on thick. Thin coats cure better.
  • Leave used cloths screwed up dry. They can catch fire.

How to keep a hardwax or oiled floor fed

Admonter Maintenance Oil Natural for Wood Flooring

Admonter Maintenance Oil Natural for Wood Flooring

Tops up the oil to keep the floor fed.

Reviews

Used this product?

We are collecting reviews on this product. Yours will be published once a few people have had their say, so the first review is never the only one.

Your email address will not be published. Required fields are marked *

for-all-floors-icon

Unsure which products will best meet your needs?

Admonter Maintenance Oil Natural$149.00
Add to cart
Four containers of 1F Wood Floor Cleaning Concentrate for maintaining lacquered and oiled timber flooring.

Order your floor care products online and receive free shipping on orders over $150

Shopping Cart
Questions about your floor? 0800 843 662·info@firstfloorcleaning.co.nz·Newmarket, Auckland